Channel heaters SHUFT series WHC, WHR, EHC, EHR, etc.

WHC water heaters for round and square channels
The housing of SHUFT air heaters is made of galvanized steel sheet, the heat exchanger is made of copper pipes with aluminum fins. To increase heat transfer, the pipes are mechanically expanded and thereby rigidly connected to the fins.
Models: WHC 150x150-2, 200x200-3, 300x300-2, 400x400-2.WHC series. Technical specifications.
WHR water heaters for rectangular channels
The housing of SHUFT air heaters is made of galvanized steel sheet. Copper heat exchanger with aluminum fins. The reduced fin pitch - 2.1 mm - made it possible to significantly increase heat transfer and optimize weight and size parameters with a slight increase in the aerodynamic resistance of the heat exchanger.
Models: WHR 300x150-2, 300x150-3, 400x200-2, 400x200-3, 500x250-2, 500x250-3, 500x300-2, 500x300-3, 600x300-2, 600x300-3, 600x350-2, 600x350-3, 700x400-2, 700x400-3, 800x500-2, 800x500-3, 1000x500-2, 1000x500-3.The WHR series. Technical specifications.
EHC electric heaters for circular channels
The housing of the air heaters is made of sheet steel with a zinc coating, and the heating elements are made of stainless steel. All air heaters of the ENS series are equipped with two-stage overheating protection.
Models: EHC 100-0,3/1, 100-0,6/1, 125-1,2/1, 125-1,8/1, 160-1,2/1, 160-2,4/1, 160-3,0/1, 160-3,0/2, 160-5,0/2, 160-6,0/2, 200-2,4/1, 200-3,0/2, 200-5,0/2, 200-6,0/2, 200-6,0/3, 250-3,0/1, 250-6,0/2, 250-6,0/3, 250-9,0/3, 250-12,0/3, 315-3,0/1, 315-6,0/2, 315-6,0/3, 315-9,0/3, 315-12,0/3, 400-9,0/3, 400-12,0/3.EHC series. Technical specifications.
EHR electric heaters for rectangular channels
All air heaters of the ENR series are equipped with two-stage overheating protection. The relay of the first stage (with automatic return to the initial position) is triggered when the air temperature at the outlet of the heater reaches 60 ° C. The relay of the second stage (with manual return to the starting position by pressing the button located on the body of the air heater) is triggered when the air temperature at the outlet of the air heater reaches 120 ° C.
Models: EHR 400x200-6, 400x200-9, 400x200-12, 400x200-15, 500x250-12, 500x250-15, 500x250-22.5, 500x300-12, 500x300-15, 500x300-22.5, 600x300-15, 600x300-22.5, 600x300-30, 600x350-15, 600x350-22.5, 600x350-30, 600x350-45, 700x400-22.5, EHR 700x400-30, 700x400-45, 700x400-60, 700x400-75, 700x400-90, 800x500-45, 800x500-60, 800x500-75, 800x500-90, 1000x500-45, 1000x500-60, 1000x500-75, EHR 1000x500-90.EHR series. Technical specifications.
The housing of SHUFT air heaters is made of galvanized steel sheet, the heat exchanger is made of copper pipes with aluminum fins. To increase heat transfer, the pipes are mechanically expanded and thereby rigidly connected to the fins.
Models: WHC 150x150-2, 200x200-3, 300x300-2, 400x400-2.
WHR water heaters for rectangular channels
The housing of SHUFT air heaters is made of galvanized steel sheet. Copper heat exchanger with aluminum fins. The reduced fin pitch - 2.1 mm - made it possible to significantly increase heat transfer and optimize weight and size parameters with a slight increase in the aerodynamic resistance of the heat exchanger.
Models: WHR 300x150-2, 300x150-3, 400x200-2, 400x200-3, 500x250-2, 500x250-3, 500x300-2, 500x300-3, 600x300-2, 600x300-3, 600x350-2, 600x350-3, 700x400-2, 700x400-3, 800x500-2, 800x500-3, 1000x500-2, 1000x500-3.
EHC electric heaters for circular channels
The housing of the air heaters is made of sheet steel with a zinc coating, and the heating elements are made of stainless steel. All air heaters of the ENS series are equipped with two-stage overheating protection.
Models: EHC 100-0,3/1, 100-0,6/1, 125-1,2/1, 125-1,8/1, 160-1,2/1, 160-2,4/1, 160-3,0/1, 160-3,0/2, 160-5,0/2, 160-6,0/2, 200-2,4/1, 200-3,0/2, 200-5,0/2, 200-6,0/2, 200-6,0/3, 250-3,0/1, 250-6,0/2, 250-6,0/3, 250-9,0/3, 250-12,0/3, 315-3,0/1, 315-6,0/2, 315-6,0/3, 315-9,0/3, 315-12,0/3, 400-9,0/3, 400-12,0/3.
EHR electric heaters for rectangular channels
All air heaters of the ENR series are equipped with two-stage overheating protection. The relay of the first stage (with automatic return to the initial position) is triggered when the air temperature at the outlet of the heater reaches 60 ° C. The relay of the second stage (with manual return to the starting position by pressing the button located on the body of the air heater) is triggered when the air temperature at the outlet of the air heater reaches 120 ° C.
Models: EHR 400x200-6, 400x200-9, 400x200-12, 400x200-15, 500x250-12, 500x250-15, 500x250-22.5, 500x300-12, 500x300-15, 500x300-22.5, 600x300-15, 600x300-22.5, 600x300-30, 600x350-15, 600x350-22.5, 600x350-30, 600x350-45, 700x400-22.5, EHR 700x400-30, 700x400-45, 700x400-60, 700x400-75, 700x400-90, 800x500-45, 800x500-60, 800x500-75, 800x500-90, 1000x500-45, 1000x500-60, 1000x500-75, EHR 1000x500-90.
All SHUFT products
The group "New Technologies" offers for review the products of the plant SHUFT: duct, roof, kitchen and axial fans, water and electric duct heaters, water and freon duct coolers, recuperators, grilles and diffusers, network elements, compact supply and exhaust systems, automation elements, compressor and condenser units, control cabinets
About SHUFT
SHUFT (Denmark) is a European engineering holding specializing in the development and production of equipment for ventilation systems. The company was founded in 1998 in Copenhagen as a manufacturer of fans for modular systems. Now there are more than 500 models of equipment in the company's nomenclature.
-
INNOVATIVE TECHNOLOGIES
The search for energy-efficient solutions is carried out in all areas of the company's activities. Innovative technologies in the field of operation of engineering systems of buildings are being introduced especially actively. -
MANY YEARS OF EXPERIENCE
In creating new models of equipment, the SHUFT team relies on its own long-term research experience and cooperation with leading European companies. -
REPRESENTATIVE OFFICE IN RUSSIA
The European manufacturer SHUFT has been represented on the Russian market of ventilation systems equipment for more than 10 years. During this period, more than 10 million products found their customers in Russia.
NEW TECHNOLOGIES GROUP
For sales and support please contact
Contact us or your local dealer for more information on certifications, features, reviews, pricing, stock availability and delivery terms for SHUFT products.
Reply guaranteed within 8 business hours
- (727)345-47-04
- (3955)60-70-56
- (8182)63-90-72
- (8512)99-46-04
- (3852)73-04-60
- (4722)40-23-64
- (4162)22-76-07
- (4832)59-03-52
- (8352)28-53-07
- (351)202-03-61
- (8202)49-02-64
- (3022)38-34-83
- (395)279-98-46
- (4932)77-34-06
- (3412)26-03-58
- (4012)72-03-81
- (4842)92-23-67
- (843)206-01-48
- (3842)65-04-62
- (4212)92-98-04
- (8332)68-02-04
- (4966)23-41-49
- (4942)77-07-48
- (861)203-40-90
- (391)204-63-61
- (3522)50-90-47
- (4712)77-13-04
- (4742)52-20-81
- (3519)55-03-13
- (375)257-127-884
- (495)268-04-70
- (8152)59-64-93
- (8552)20-53-41
- (831)429-08-12
- (3843)20-46-81
- (383)227-86-73
- (3496)41-32-12
- (3812)21-46-40
- (4862)44-53-42
- (3532)37-68-04
- (8412)22-31-16
- (342)205-81-47
- (8142)55-98-37
- (8112)59-10-37
- (863)308-18-15
- (4912)46-61-64
- (812)309-46-40
- (846)206-03-16
- (8342)22-96-24
- (845)249-38-78
- (8692)22-31-93
- (3652)67-13-56
- (4812)29-41-54
- (862)225-72-31
- (8652)20-65-13
- (3462)77-98-35
- (8212)25-95-17
- (4752)50-40-97
- (998)71-205-18-59
- (8482)63-91-07
- (3822)98-41-53
- (4872)33-79-87
- (4822)63-31-35
- (3452)66-21-18
- (347)229-48-12
- (3012)59-97-51
- (8422)24-23-59
- (8672)28-90-48
- (4922)49-43-18
- (423)249-28-31
- (844)278-03-48
- (8172)26-41-59
- (473)204-51-73
- (4112)23-90-97
- (4852)69-52-93
- (343)384-55-89
Send your question now: